PRODUCT
NAME
|
Styrofoam®
Board
Products and Systems |
MANUFACTURER
|
The Dow Chemical Company
2020 Dow
Center
Midland, Michigan 48674, USA
1-800-441-4369
Form
No. 179-4298-896 DMB&B |
Product:
TAPERED DECKMATE - PLUS
MECHANICALLY FASTENED SYSTEMS |
 Tapered Deckmate ®or Deckmate Plus® is installed on flat or tapered roofs and covered with
a single ply membrane. Mechanically attached black or fully adhered membranes
require a cover board.
* Precision tapered panels - allow
water drainage.
* Available in a variety of thicknesses.
* Made-to-Order, thinner cross-sections achieve high average R-values,
save on costs & material. |
| Product:
DECKMATE® - PLUS |
 Installed directly on the metal deck by standard practices
eliminating the need for a labor intensive thermal barrier in a loose laid
ballasted, mechanically attached or fully adhered membrane system.
* Full range of profiles for all applications
* High
moisture resistance - long term R-value |
| OTHER
PRODUCTS: |
* THERMADRY® - Drainage
Panels
* PROTECTION BOARD - For Masonry Walls.
* ROOFING RECOVERY
BOARD
* PLAZAMATE®, ROOFMATE®
- for Plaza Decks.
* HIGH LOAD 40, 60 or 100 - for Geotechnical Aps.
*
FREEZERMATE® - for Low Temperatures.
* Please
Email for Details on These Products. | |
| Product:
STYROFOAM CAVITYMATE® |
 Installed directly between the wall ties on 16" centers.
*
Designed to save the contractor time & money.
* 16" width
eliminates need to cut/snap to fit.
* Proven moisture
resistant/long-lasting.
* Lightweight - easy to work with and
install. |
Product:
SQUARE EDGE INSULATION
|
 Installed against the exterior foundation wall. Proven moisture
resistant, long lasting thermal performance.
* High Compressive strength -
rigid and durable.
* Resistant to crushing by back fill.
*
Lightweight, easy to cut, easy to work with. |
PROVEN
PERFORMANCE
|
Since its introduction in 1948, STYROFOAM brand
insulation, the Blue¹ extruded polystyrene foam, has been a proven
performer in millions of installations worldwide. The reason: its unique,
tight closed cell structure leaves no voids between the cells. The result: high
compressive strength and unequaled resistance to water penetration.
In
a 20 day Water Submersion Test, Molded Bead Polystyrene absorbed about
6% (by volume), Polyisocyanurate about 3%, and Styrofoam® absorbed less than
1%!
In an R-value Retention Field Test, after 5 years,
Styrofoam brand Extruded Polystyrene retained R-value was 93%, unlike the
competitions 28%
& 33%. |
¹Trademark of the Dow Chemical Co.
NOTE: DATA FOR COMPARISON PURPOSES ONLY. NOT TO BE USED FOR
SPECIFICATION PURPOSES.
CLICK HERE FOR DETAILED SPECIFICATIONS. | |
MSDS
File for Styrofoam FB