Industrial Insulation
DATA
SHEET
Extol of Ohio, Inc.
info@ExtolOhio.com
|| 208 Republic St, Norwalk, OH 44857
Ph:
800.486.9865 || Or: 419.668.2072 || Fx: 419.663.1992
|
|
Extol of Ohio, Inc. info@ExtolOhio.com
|| 208 Republic St, Norwalk, OH 44857 |
| TRYMER* 1800 BRAND Polyisocyanurate Foam Insulation DATA SHEET PAGE 1 OF 2 | ||
| TRYMER* 1800 BRAND Polyisocyanurate
Foam Insulation is a polyurethane modified polyisocyanurate cellular plastic
supplied in the form of bunstock for fabrication into sheets, pipe, tank and
vessel covering, and other shapes¹ for a variety of thermal insulation
applications. Although similar in physical form to polyurethane foams, TRYMER
1800 has improved dimensional stability over a wider range of temperatures.
TRYMER 1800 has been specifically formulated to provide excellent thermal
insulation properties without the use of CFC blowing agents.
TRYMER 1800 is available as bunstock 48" (122 cm) wide by 24" (61cm) high by 36" (91cm) , 96" (244cm) or 108" (274 cm) lengths for further fabrication into various sizes and shapes to meet various end use needs. Custom lengths are available. Just send us a note for details. |
APPLICATIONS
TRYMER 1800 is used extensively in industrial and commercial applications within the service temperature range of -297°F to +300°F (-183°C to +149°C)². Because of the critical technical design aspects of many of these applications, qualified designers or consultants should design the total system. EXTOL can provide general guidelines and recommendations on many typical applications for TRYMER 1800. Call 1-800-486-9865 or Email an Extol representative for details. Some typical applications include:
|
Like all cellular plastics, this
product will degrade upon prolonged exposure to sunlight. A covering to block
ultraviolet radiation must be used to prevent this degradation. Other coverings
to protect the foam from the elements may also be required. Consultation with
local building code officials, design engineers/specifiers, or insurance
personal is recommended before application.
Safety Considerations TRYMER 1800 requires some care in handling. All persons who work with these materials must know and follow the proper handling procedures. The current Material Safety Data Sheet contains additional information on the safe handling, storage and use of this material. A copy of the MSDS can be obtained by clicking here, or by calling 1-800-486-9865 |
| TRYMER* 1800 BRAND Polyisocyanurate Foam Insulation DATA SHEET PAGE 2 OF 2 | |||||
| PHYSICAL PROPERTIES(1) | ASTM METHOD | ENGLISH UNITS | ENGLISH VALUES(2) | METRIC UNITS | METRIC VALUES(2) |
| DENSITY(3) | D 1622 | lb/ft³ | 1.80 | kg/m³ | 28.8 |
| Compressive Strength(3) Parallel to Rise (Thickness) Perpendicular to Rise (Width) Perpendicular to Rise (Length) |
D 1621 | lb/in² | 19 10 19 |
kPa | 131 69 131 |
| Compressive Modulus Parallel to Rise (Thickness) Perpendicular to Rise (Width) Perpendicular to Rise (Length) |
D 1621 | lb/in² | 400 200 400 |
kPa | 2760 1380 2760 |
| Shear Strength Parallel to Rise |
C 273 | lb/in² | 19 | kPa | 131 |
| Shear Modulus Parallel to Rise |
C 273 | lb/in² | 200 | kPa | 1380 |
| Tensille Strength Parallel to Rise (Thickness) Perpendicular to Rise (Width) Perpendicular to Rise (length) |
D 1623 | lb/in² | 25 18 24 |
kPa | 172 124 165 |
| Tensille Modulus Parallel to Rise (Thickness) Perpendicular to Rise (Width) Perpendicular to Rise (length) |
D 1623 | lb/in² | 1100 500 1200 |
kPa | 7580 3450 8270 |
| Flexural Strength Parallel & Perpendicular |
C 203 | lb/in² | 30 | kPa | 207 |
| Flexural Modulus Parallel & Perpendicular |
C 203 | lb/in² | 700 |
kPa | 4820 |
| k-Factor (75°F (24°C) mean temp.) Initial Aged 180 days @75°F (24°) |
C 518 | BTU·in/hr·ft²·°F | 0.141 0.190 |
W/m°C | 0.020 0.027 |
| R-Value/in. (75°F (24°C) mean temp.) Initial Aged 180 days @75°F (24°C) |
C 518 | Hr·ft²·°F/BTU | 7.1 5.3 |
m²·°C/W | 1.25 0.93 |
| Closed Cell Content | D 2856 | % | 90 | % | 90 |
| Water Absorption | C 2842 | % by volume lb/ft2 | 2 0.04 |
% by Volume g/cm2 | 2 0.02 |
| Water Absorption | C 272 | % by volume | 0.2 | % by Volume | 0.2 |
| Water Vapor Permeability | E 96 | Perm-Inch | 4 | (ng/Pa·S·m) | 5.8 |
| Dimensional Stability (4) @-40°F (-40°C), 7 Days Length Volume @-158°F (70°C)/97% Relative Humidity, 7 days Length Volume @-10°F (-23°C), 7 days Length Volume @300°F (149°C), 7 days Length Volume @158°F (70°C) Length Volume |
D 2126 | % Change % Change % Change % Change % Change % Change % Change % Change % Change % Change |
-0.5 -1.0 2.5 3.5 0.2 0.5 4.5 5.0 1.5 1.7 |
% Change % Change % Change % Change % Change % Change % Change % Change % Change % Change |
-0.5 -1.0 2.5 3.5 0.2 0.5 4.5 5.0 1.5 1.7 |
| Service Temperature(5) | °F | -297 to +300 | °C | -183 to + 149 | |
| Surface Burning Characteristics (6) Flame spread, 1"- 6" (2.5 - 15 cm) Smoke gen. 1" (2.5cm) 2" - 6" (5 - 15 cm) |
E 84 | 25 45 105-130 |
25 45 105-130 | ||
| Color | Gray | Gray | |||
(1) All properties are measured at 74°F, unless
otherwise indicated.
(2) Unless otherwise, indicated, data shown are typical
values obtained from representative production samples. This data may be used
as a guide for design purposes, but should not be construed as specifications.
For property ranges and specifications, CLICK
HERE.
(3) Average value through foam cross section.
(4) Frequent and
severe thermal cycling can produce dimensional changes significantly greater
than those stated here. Special design considerations must be made in systems
that cycle frequently.
(5) Above 300°F, discoloration and charring will
occur, resulting in an increased k-factor in the discolored area.
(6) This
numerical flame spread data is not intended to reflect hazards presented by this
or any other material under actual fire conditions.
Dow Chemical Company, Form No. 179-8021-1096QRP
Related Links:
Specifications
for Isyocyanurate-
Cold Service (Passkey Required
for SPECS) Specifications
for Isyocyanurate-
Hot Service (Passkey Required
for SPECS)
MSDS
file for Trymer 1800
Ph: 800.486.9865 || Or: 419.668.2072 ||
Fax: 419.663.1992
info@ExtolOhio.com || Located at:
208 Republic Street, Norwalk, Ohio 44857
EXTOL INSULATION SYSTEMS: