Industrial Insulation
DATA
SHEET
Extol of Ohio,
Inc.
info@ExtolOhio.com
|| 208 Republic St, Norwalk, OH 44857
Ph: 800.486.9865
|| Or: 419.668.2072
|| Fx: 419.663.1992
|
|
Extol of Ohio,
Inc. info@ExtolOhio.com
|| 208 Republic St, Norwalk, OH 44857 |
| TRYMER* 2000 BRAND Polyisocyanurate Foam Insulation DATA SHEET PAGE 1 OF 2 | ||
| TRYMER* 2000 BRAND
Polyisocyanurate Foam Insulation is a polyurethane modified polyisocyanurate
cellular plastic supplied in the form of bunstock for fabrication into sheets,
pipe, tank and vessel covering, and other shapes¹ for a variety of thermal
insulation applications. although similar in physical form to polyurethane
foams, TRYMER 2000 has improved dimensional stability over a wider range of
temperatures. TRYMER 2000 has been specifically formulated to provide excellent
thermal insulation properties without the use of CFC blowing agents.
TRYMER 2000 is available as bunstock 48" (122 cm) wide by 24" (61cm) high by 36" (91cm), 96" (244 cm) or 108" (274cm) lengths for further fabrication into various sizes and shapes to meet various end use needs. Custom lengths are available. Just send us a note for details. |
APPLICATIONS TRYMER 2000 is used extensively in industrial and commercial applications within the service temperature range of -297°F to +300°F (-183°C to +149°C)². Because of the critical technical design aspects of many of these applications, qualified designers or consultants should design the total system. EXTOL can provide general guidelines and recommendations on many typical applications for TRYMER 2000. Call 1-800-486-9865 or Email an Extol representative for details. Some typical applications include:
|
Like all cellular plastics,
this product will degrade upon prolonged exposure to sunlight. A covering to
block ultraviolet radiation must be used to prevent this degradation. Other
coverings to protect the foam from the elements and to meet applicable fire
regulations may also be required. Consultation with local building code
officials, design engineers/specifiers, or insurance personal is recommended
before application.
Safety Considerations TRYMER 2000 requires some care in handling. All persons who work with these materials must know and follow the proper handling procedures. The current Material Safety Data Sheet contains additional information on the safe handling, storage and use of this material. A copy of the MSDS can be obtained by clicking here, or by calling 1-800-486-9865 |
| TRYMER* 2000 BRAND Polyisocyanurate Foam Insulation DATA SHEET PAGE 2 OF 2 | |||||
| PHYSICAL PROPERTIES(1) | ASTM METHOD | ENGLISH UNITS | ENGLISH VALUES(2) | METRIC UNITS | METRIC VALUES(2) |
| DENSITY | D 1622 | lb/ft³ | 2.05 | kg/m³ | 32.8 |
| Compressive Strength(3) Parallel to Rise (Thickness) Perpendicular to Rise (Width) Perpendicular to Rise (Length) |
D 1621 | lb/in² | 24 13 24 |
kPa | 165 90 165 |
| Compressive
Modules Parallel to Rise (Thickness) Perpendicular to Rise (Width) Perpendicular to Rise (Length) |
D 1621 | lb/in² | 550 325 550 |
kPa | 3790 2240 3790 |
| Shear Strength Parallel and Perpendicular |
C 273 | lb/in² | 24 | kPa | 165 |
| Shear Modulus Parallel and Perpendicular |
C 273 | lb/in² | 300 | kPa | 2070 |
| Tensille Strength Parallel to Rise (Thickness) Perpendicular to Rise (Width) Perpendicular to Rise (Length) |
D 1623 | lb/in² | 27 24 29 |
kPa | 186 165 200 |
| Tensille Modulus Parallel to Rise (Thickness) Perpendicular to Rise (Width) Perpendicular to Rise (Length) |
D 1623 | lb/in² | 1500 600 1500 |
kPa | 10300 4130 10300 |
| Flexural Strength Parallel and Perpendicular |
C 203 | lb/in² | 44 | kPa | 303 |
| Flexural Modulus Parallel and Perpendicular |
C 203 | lb/in² | 1000 | kPa | 6890 |
| k-Factor (75°F (24°C)mean
temp.) Initial Aged 180 days @75°F (24°) |
C 518 | BTU·in/hr·ft²·°F | 0.141 0.190 |
W/m°C | 0.020 0.027 |
| R-Value/in. (75°F (24°C)mean
temp.) Initial Aged 180 days @75°F (24°C) |
C 518 | Hr·ft²·°F/BTU | 7.1 5.3 |
m²·°C/W | 1.25 0.93 |
| Closed Cell Content | D 2856 | % | 92 | % | 92 |
| Water Absorption | D 2842 | % by Volume lb/ft² |
2 0.04 |
% by Volume g/cm² |
2 0.02 |
| Water Absorption | C 272 | % by volume | 0.15 | % by Volume | 0.15 |
| Water Vapor Permeability | E 96 | Perm-Inch | 4 | ng/Pa·S·m | 6.25 |
| Dimensional Stability (3)
(4) @-40°F (-40°C), 7 Days Length Volume @-158°F (70°C)/97% Relative Humidity, 7 Days Length Volume @-10°F (-23°C), 7 Days Length Volume @300°F (149°C), 7 Days Length Volume @-158°F (70°C) Length Volume |
D 2126 | % Change % Change % Change % Change % Change % Change % Change % Change % Change % Change |
-0.2 -0.5 2.0 3.0 0.3 0.7 3.0 3.5 -0.1 0.8 |
% Change % Change % Change % Change % Change % Change % Change % Change % Change % Change |
-0.2 -0.5 2.0 3.0 0.3 0.7 3.0 3.5 -0.1 0.8 |
| Service Temperature(5) | °F | -297 to +300 | °C | -183 to + 149 | |
| Surface Burning Characteristics
(6) Flame Spread 1" through 6" (2.5 through 15 cm) Smoke Generation, 1.5" 2' through 6" (5 through 15cm) |
E 84 | 25 50 90 |
25 50 90 |
||
| Color | Red | Red | |||
(1) All properties are measured at 74°F (23°C),
unless otherwise indicated.
(2) Unless otherwise, indicated, data shown are
typical values obtained from representative production samples. This data may
be used as a guide for design purposes, but should not be construed as
specifications. For property ranges and specifications,
CLICK HERE.
(3) Average value through
foam cross section.
(4) Frequent and severe thermal cycling can produce
dimensional changes significantly greater than those stated here. Special
design considerations must be made in systems that cycle frequently.
(5)
Above 300°F, discoloration and charring will occur, resulting in an
increased k-factor in the discolored area.
(6) This numerical flame spread
data is not intended to reflect hazards presented by this or any other material
under actual fire conditions.
Dow Chemical Company, Form No. 179-8022-896QRP
Related Links:
Specifications for Isyocyanurate- Cold Service (Passkey Required for SPECS) Specifications for Isyocyanurate- Hot Service (Passkey Required for SPECS)
MSDS file for Trymer 2000
Ph: 800.486.9865 || Or: 419.668.2072 ||
Fax: 419.663.1992
info@ExtolOhio.com || Located at:
208 Republic Street, Norwalk, Ohio 44857
EXTOL INSULATION SYSTEMS: