TRYMER 2000 is available as bunstock 48" (122 cm) wide by 24" (61cm) high by 36" (91cm), 96" (244 cm) or 108" (274cm) lengths for further fabrication into various sizes and shapes to meet various end use needs. Custom lengths are available.
APPLICATIONS
TRYMER 2000 is used extensively in industrial and commercial applications within the service temperature range of -297°F to +300°F (-183°C to +149°C)². Because of the critical technical design aspects of many of these applications, qualified designers or consultants should design the total system. EXTOL can provide general guidelines and recommendations on many typical applications for TRYMER 2000. Call 1-800-486-9865 or Email an Extol representative for details. Some typical applications include:
Pipe, tank, and vessel insulation
Fabricated pipe fitting insulation
Core material for architectural and structural panels
Insulation for shipping containers, trucks, or rail cars
Core material for factory built penalized constructions
Flat or tapered boardstock for roof insulation
Like all cellular plastics, this product will degrade upon prolonged exposure to sunlight. A covering to block ultraviolet radiation must be used to prevent this degradation. Other coverings to protect the foam from the elements and to meet applicable fire regulations may also be required. Consultation with local building code officials, design engineers/specifiers, or insurance personal is recommended before application.
Safety Considerations
TRYMER 2000 requires some care in handling. All persons who work with these materials must know and follow the proper handling procedures. The current Material Safety Data Sheet contains additional information on the safe handling, storage and use of this material. A copy of the MSDS can be obtained by clicking here, or by calling 1-800-486-9865
.jpg)
Specs by Mfg.
Technical Data...
